F303 Floorstanding Speaker
Featuring two potent 150mm (6”) mid/bass drivers, and a 25mm polyester dome tweeter delivering an authoritative performance with power and passion. High output levels and an easy to drive load make the F303 suitable for a wide range of home entertainment amplifiers and applications.
Employing a D’Appolito driver configuration, positioning the tweeter centrally between the two bass / midrange drivers, provides a smooth dispersion characteristic through the critical crossover region. The sweet spot is widened, resulting in enhanced musical performance on or off the loudspeaker’s main axis.
System Type - 2 way, rear ported
Recommended amplifier power (Watt RMS) - 35- 150
Continuous power handling (Watt RMS) - 75
Sensitivity (2.83 Volt @ 1m) - 91dB
Nominal impedance - 8 Ohm
Frequency response (-6dB typical in room) - 32Hz- 28kHz
Drive unit complement - 2 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter
Crossover frequency - 3.2kHz
Crossover type - 2nd order low pass, 3rd order high pass -
Dimensions - HxWxD - 962 x 190 x 271mm (37.9 x 7.5 x 10.7”)
Weight - Each - 14.6kg (32.2lb)
Finishes - Walnut / Black Ash / Light Oak
Featuring two potent 150mm (6”) mid/bass drivers, and a 25mm polyester dome tweeter delivering an authoritative performance with power and passion. High output levels and an easy to drive load make the F303 suitable for a wide range of home entertainment amplifiers and applications.
Employing a D’Appolito driver configuration, positioning the tweeter centrally between the two bass / midrange drivers, provides a smooth dispersion characteristic through the critical crossover region. The sweet spot is widened, resulting in enhanced musical performance on or off the loudspeaker’s main axis.
System Type - 2 way, rear ported
Recommended amplifier power (Watt RMS) - 35- 150
Continuous power handling (Watt RMS) - 75
Sensitivity (2.83 Volt @ 1m) - 91dB
Nominal impedance - 8 Ohm
Frequency response (-6dB typical in room) - 32Hz- 28kHz
Drive unit complement - 2 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter
Crossover frequency - 3.2kHz
Crossover type - 2nd order low pass, 3rd order high pass -
Dimensions - HxWxD - 962 x 190 x 271mm (37.9 x 7.5 x 10.7”)
Weight - Each - 14.6kg (32.2lb)
Finishes - Walnut / Black Ash / Light Oak
Featuring two potent 150mm (6”) mid/bass drivers, and a 25mm polyester dome tweeter delivering an authoritative performance with power and passion. High output levels and an easy to drive load make the F303 suitable for a wide range of home entertainment amplifiers and applications.
Employing a D’Appolito driver configuration, positioning the tweeter centrally between the two bass / midrange drivers, provides a smooth dispersion characteristic through the critical crossover region. The sweet spot is widened, resulting in enhanced musical performance on or off the loudspeaker’s main axis.
System Type - 2 way, rear ported
Recommended amplifier power (Watt RMS) - 35- 150
Continuous power handling (Watt RMS) - 75
Sensitivity (2.83 Volt @ 1m) - 91dB
Nominal impedance - 8 Ohm
Frequency response (-6dB typical in room) - 32Hz- 28kHz
Drive unit complement - 2 x 150mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter
Crossover frequency - 3.2kHz
Crossover type - 2nd order low pass, 3rd order high pass -
Dimensions - HxWxD - 962 x 190 x 271mm (37.9 x 7.5 x 10.7”)
Weight - Each - 14.6kg (32.2lb)
Finishes - Walnut / Black Ash / Light Oak